APM 460 PUF

The APM 460PUF Sampler has been designed for monitoring Pesticides, Polynuclear Aromated Hydrocarbons (PAHs) and Dioxins (PCDDs) in ambient air. Air enters the system through a Cyclone that traps the coarse particulates so that only PM10 size particles reach the filter holder. The system uses a Polyurethane Foam (PUF) sorbent placed below a particulate filter of size 8 inch X 10 inch. The PUF holder is compatible with standard 75mm long, 60mm Dia PUF cartridges prescribed in applicable EPA methods TO-4A, TO-9A & TO-13A for high volume sampling of Dioxins, Furans etc.

The APM 460PUF Sampler has been designed for monitoring Pesticides, Polynuclear Aromated Hydrocarbons (PAHs) and Dioxins (PCDDs) in ambient air.

Features:

Teflon Lined PUF holder compatible with standard 60mm dia PUF cartridges
Brushless blower reduces equipment downtime and maintenance effort.
Significantly reduced Noise
Electromagnetic Interference (EMI) to TVs totally eliminated
Over temperature cut-off protects Blower

Flow Rate	200 - 300 liters/min user adjustable via suitable motor speed control
Particle Fractionater	A cyclone device designed for flow range of 200-250 liter/min for fractionating dust into two fractions. PM10 dust is accumulated on the filter paper while coarse dust is collected in a cup placed under the cyclone.
Puf Cartridge	Polyurethane foam for trapping the low molecular weight PAH and PCBs Size: 60mm diameter length about 75mm.
Puf Housing	Housing of APM 460PUF is compatible with Standard borosilicate glass cartridges available from SKC or other international vendors. It is lined with Teflon and fitted at the bottom of filter adapter casting.
Recommended Filter	Any Standard Filter of size 8 inch X 10 inch
Elapsed Time Indicator	Electromechanical Time Totalizer (0 to 9999.99 hours) accurate upto 0.6 minute gives actual operation time of the sampler.
Automatic sampling time control	A programmable Digital Timer is used to shut off the sampler after a preset sampling interval.
Blower	Brushless induction motor driven with inbuilt over temperature protection.
Power Requirements	Nominal, 220V,Single Phase, 50-Hz AC mains supply. Power consumption is 400 watts
Overall Size	Approximately 430 x 320 x 930mm
Weight	45 kg
Warranty	One year